SS250 engine with CasaCase casing (partially assembled)
Want RLC to build you a complete Plug 'n' Play SS250 engine? No problem - we can do it! Prices from Euro 7500!
Suitable for: Lambretta
Country of Manufacture: Italy
After countless tests and trials, we have found that the fabled SS225 kit gave incredible results when coupled with a 64mm stroke crank and the CasaCase engine casing, giving a 250cc capacity! The engine is mental : it has loads of torque, pulls really well from low down the rev range and it's FAST! This is the engine that would take you to the moon and back - and it's LOADS of fun! In our own engines we fit a Cyclone 5 Pro gearbox and a Protti but you can choose to fit what you prefer. That’s why we are supplying this partially completed, with the crank, main bearings & oilseals and cylinder kit already fitted. You just fit your transmission and ignition of choice, fine tune the carb for your environment and you're sorted!
Expected power output would be approx. 30bhp depending on the choice of exhaust used.
The SS250 comes complete with the following parts;
1 x complete CasaCase engine casing kit (with anodised parts)
1 x 64mm stroke crank (fitted)
2 x crankshaft bearings (fitted)
2 x crankshaft oilseals (fitted)
1 x pr. silentblocks (fitted)
1 x complete latest spec. SS225 kit with 'Radiale' cylinder head (fitted)
1 x small end bearing (fitted)
Gaskets, fasteners and sundries for the fitment of the top-end
Please note that this engine is a heavy bit of kit and is shipped in a specially made protective wooden crate. Shipping costs charged intially upon ordering may only be partial and final costs will be based upon the buyers actual address. We will subsequently contact you with these. Shipping costs are the actual costs and are EXACT. An indication of costs is; Euro 100 mainland Europe / Euro 100-140 UK / Euro 250+ USA.
|Suggested by RLC||No|